T10 / T10A is a carbon tool steel with an average carbon content of 1%.[TJC STEEL]
Standards GB/T 1298-2008 《tool carbon steel》 GB/T 1299-2014[TJC STEEL] 《tool and mould steel》 Component Specification GRADE T10 T10A C 0.95~1.04 0.95~1.04 Si ≤0.35 ≤0.35 Mn ≤0.40 ≤0.40 P ≤0.035[TJC STEEL] ≤0.030 S ≤0.030 ≤0.020 Critical Point critical point Ac1 Acm Ar1 T (approximation)/℃ 730 800 700 Coefficient Of Linear Expansion T℃ coefficient of linear expansion α/×10-6℃ 20~100 11.5 20~200 13.0 20~300 14.3 20~400 14.8 20~500 15.1 20~600 16.0 20~700 15.8 20~800 32.1 20~900 32.4[TJC STEEL] Heat Conductivity T℃ heat conductivityλ/W·(m·k)-1 20 40.20 100 43.96 300 41.03 600 38.10 900 33.91 Hardness state hardness anneal ≤197HBW hardening heat:760~780℃ ≥62HRC Coolant: water Applications: When quenching and heating (up to 800℃), the fine grain structure of T10 steel can still be maintained.Have not dissolve excess of carbide in steel after quenching and so is of T8 steel with high abrasion resistance, suitable [TJC STEEL]for cutting edge at work the same hot tools, such as processing wood cutter, hand cross cut saw, sawing machine, hand joinery with fine woodworking saws, twist drill, wire drawing die, die, cold heading die, small size of uniform cold trimming and piercing die and low precision in the shape of a simple card board, fitter scraper, file, etc. Comments are closed.
|
TJC STEELNEWS& KNOWLEDGE TJC Archives
December 2024
Categories |
TJC IRON& STEEL CO.,LTD
EMAIL: [email protected]
HENAN SCALE IMP&EXP CO.,LTD
ZHENGZHOU ZHIYUAN IMP&EXP CO.,LTD
COPYRIGHT © 2015