UNS C97600 Alloy is also named as Nickel Silvers,Copper-Nickel-Zinc Alloys/ Nickel Silvers, whose content of copper is not less than 63%. The most [TJC STEEL]popular applications for UNS C97600 is marine castings, protective device fittings, pump casings, etc.
Standard for C97600 Nickel Silver Bronze:ASTM B584-2006. Chemical Composition [TJC STEEL]for C97600 Nickel Silver Bronze(%): Cu(铜)63.0-66.0 Sn(锡)3.5-4.5 Pb(铅)3.5-5.0 Zn(锌)3.0-9.0 Fe(铁)1.0 Sb(锑)0.25 Ni(镍)+Co(钴)19.5-21.0 S(硫)0.08 P(磷)0.05 Al(铝)0.005 Mn(锰)1.0 Si(硅)0.05 [TJC STEEL] ZG40CrMnMoNiSiRe rare earth wear-resisting, heat-resisting and corrosion-resistant alloy is made of iron vanadium (FeV), iron niobium (FeNb) and copper (Cu) on the basis of the original precious materials FeCr, FeMn, FeMo, Ni, Re and FeSi. The material not only has high abrasion resistance of alloy casting, but also has high mechanical strength and impact resistance At the same time, improve the solderability of the material. In addition, after adding FeV,FeNb and Cu, the metallogrTJC STEELaphic structure of the material changes again, the grain is finer, the strength is higher, the plasticity is stronger, and the metal matrix is further passivated, so that the wear resistance of the original material has been improved. The CN content of Ni and Cr elements in the alloy directly determines the temperature resistance of the material. The content of Cr and Cu elements determines the corrosion resistance of the material. The reasonable collocation of these elements makes the new rare earth wear-resistant alloy material have several properties at the same time, and can adapt to the use of various harsh working conditions. ZG40CrMnMoNiSiRe through a period of medium transport after the inner wall of the pipeline smooth as a mirror, greatly reduce the runningTJC STEEL resistance of the pipeline, improve the service life of the pipeline, further improve the wear resistance of the material.
ZG40CrNiMnMoSiRe Wear Resistant Steel Alloy Composition: Cr26%, Ni0.3%, Mo0.2%, Mn1.2%, Si0.8%, C2%. The casting of ZG40CrMnMoNiSiRe alloy tube has no defects, such as pores, slag inclusion, loose organization, large deformation,TJC STEEL etc., and the alloy tube has insufficient wear, heat and corrosion resistance, which can not meet the use of harsh working conditions. In particular, the wear of the alloy tube by abrasive particles is the most serious form of wear in all kinds of wear. Its essence is the result of hard abrasive particles cutting or chiseling on the metal surface. The abrasive particles penetrate the metal surface and produce plastic deformation and wear marks until the metal surface is worn, which greatly reduces the service life of the alloy tube. ZG40CrMnMoNiSiRe cast steel (including alloy steel) is widely used in the field of anti-wear, and its manufacturing process is relatively simple. However, due to the limitations of the properties of the material itself and the limitations of the process, the surface hardness of the cast steelTJC STEEL material (about 60) is much lower than that of the ceramic (more than 80), and the wear-resisting performance of ZG40CrMnMoNiSiRe is only equivalent to one tenth or lower of the ceramic. (Please refer to the wear test report of Powder Metallurgy Institute of Central South University and the jet wear test results of Kyushu Institute of Industrial Ceramics in Japan for specific data). Some of the elbows made by it were worn out after more than one year of operation. In addition, cast steel pipeline thickness is large, very heavy, and high carbon content, poor weldability, on-site heat treatment of welding TJC STEELseams, to the site installation and maintenance brings considerable difficulties. GGG40 is one kind of nodular cast iron named in Din standard.
The Chemical Composition of GGG40: C:3.6-4%,Si:2.5-3%,Mn:0.35-0.45%,P:0.06%MAX,S:0.02%MAX,Cr:0.08%MAX,Mo:0.2%MAX,Cu:0.5%MAX,Mg:0.04-0.06%. Nodular cast iron is a kind of high strength cast iron material developed in the 1950s. Its comprehensive performance is TJC STEELclose to that of steel. Based on its excellent performance, it has been successfully used to cast some parts with complex forces and high requirements for strength, toughness and wear resistance. Nodular cast iron has been rapidly developed into a very widely used cast iron material, second only to gray cast iron. The so-called "iron instead of steel", mainly refers to ductile iron. Nodular cast iron is through spheroidization and inoculation treatment to get spherical graphite, effectively improve the mechanicalTJC STEEL properties of cast iron, especially improve the plasticity and toughness, so as to get higher strength than carbon steel. In addition to iron, the chemical composition of nodular cast iron is usually 3.0 ~ 4.0% carbon content, 1.8 ~ 3.2% silicon TJC STEELcontent, the total amount of manganese, phosphorus, sulfur is not more than 3.0% and an appropriate amount of rare earth, magnesium and other spheroidal elements. Other grades/ materials in GGG series cast irons: TJC STEELGG20, GG25, GGG40, GGG40.3, GGG45, GGG50, GGG60 Cast Iron. |
TJC STEELNEWS& KNOWLEDGE TJC Archives
December 2024
Categories |
TJC IRON& STEEL CO.,LTD
EMAIL: [email protected]
HENAN SCALE IMP&EXP CO.,LTD
ZHENGZHOU ZHIYUAN IMP&EXP CO.,LTD
COPYRIGHT © 2015