Menu
06Cr13, the American standard 410S, is the lowest carbon content in the Cr13 martensitic stainless steel.Due to the microstructure of[TJC STEEL] the matrix under annealing condition, it is also classified as ferritic stainless steel in a few standards.
Standard Control CHINA GB/T 20878-2007 S41008 06Cr13 (0Cr13) GB/T 24511-2009 S11306 AMERICA ASTM A240-15a S41008,410S JAPAN JIS G 4304:2005 SUS410S GERMANY DIN EN 10088-2:1995[TJC STEEL] X6Cr13,1.4000 Component Specification GRADE 06Cr13* 410S SUS410S 1.4000 C ≤0.08 ≤0.08 ≤0.08 ≤0.08 Si ≤1.00 ≤1.00 ≤1.00 ≤1.00 Mn ≤1.00 ≤1.00[TJC STEEL] ≤1.00 ≤1.00 P ≤0.040 ≤0.040 ≤0.040 ≤0.040 S ≤0.030 ≤0.030 ≤0.030 ≤0.015 Cr 11.5~13.5 11.5~13.5 11.5~13.5 12.0~14.0 Ni (≤0.60) ≤0.60 (≤0.60) -- *:S41008 is listed in the table, while S11306 is slightly different in composition. Mechanical Property Density(g/cm3)20℃[TJC STEEL] 7.75 Specific heat [kJ/(kg·K)] 0~100℃ 0.46 Heat conductivity [W/(m·K)] 100℃ 25.0 coefficient of linear expansion(10-6/K) 0~100℃ 10.6 0~500℃ 12.0 specific resistance(Ω·mm2/m)20℃ 0.60 longitudinal modulus of elasticity(kN/mm2)20℃ 220 magnetism Y Mechanical Property Dimensions of sample hairs(mm) ≤75 heat treating regime anneal[TJC STEEL] 800 ~ 900 ℃ slow cooling Or about 750℃ fast cooling quench 950 ~ 1000 ℃ cold oil temper 700~750℃cold oil Mechanical properties (quenching + tempering) Specified non-proportionality Extension strength MPa ≥345 strength of extension MPa ≥490 Percentage elongation after fracture % ≥24 Percentagereduction of area; reduction of area ≥60 The hardness of delivery HBW anneal ≤183 Material Characteristics: (1) The corrosion resistance and corrosion resistance are similar to 1Cr13 (410) and better, in low concentration of mild organic and [TJC STEEL]inorganic acid, alkali and some chemical conditions have corrosion resistance. (2) Good oxidation resistance, sustainable use in 705℃ environment. (3) good plastic toughness, easy to be formed by rotation, bending and rolling. (4) It can be welded by common fusion and resistance technology. Applications: The main product form [TJC STEEL]is plate, used for structural parts such as automobile muffler and exhaust system components, but also widely used in containers, heat exchangers, underground pipes, etc. Comments are closed.
|
TJC STEELNEWS& KNOWLEDGE TJC Archives
October 2024
Categories |
TJC IRON& STEEL CO.,LTD
TEL:+86-371-86107816; +8613674998777
EMAIL: [email protected]
HENAN SCALE IMP&EXP CO.,LTD
ZHENGZHOU ZHIYUAN IMP&EXP CO.,LTD
COPYRIGHT © 2015
EMAIL: [email protected]
HENAN SCALE IMP&EXP CO.,LTD
ZHENGZHOU ZHIYUAN IMP&EXP CO.,LTD
COPYRIGHT © 2015